我公司使用FTP服務器為客戶上傳數據，理論上可以使用任何FTP客戶端下載。您僅需幾步即可下載您的文件。

注意數據請在一周內下載完成，超時自動刪除數據。

注意數據請在一周內下載完成，超時自動刪除數據。

注意數據請在一周內下載完成，超時自動刪除數據。

下面以Windows平臺為例：

第1步 下載ftp客戶端軟件

點擊下載：FlashFXP單文件版

第2步 打開ftp客戶端軟件下載您的文件

下面以macOS平臺為例：

服務器地址：ftp://cloud.data-sos.cc:2100

轉載請注明：成都千喜數據恢復中心 » FTP下載方法說明

在監控技術廣泛應用的當下，?？低暎℉IKVISON）晧視通嵌入式硬盤錄像機所存儲的監控視頻數據，其安全性與完整性備受關注。成都千喜數據恢復中心精心打造的 Data-SOS?？低?HIKVISON)晧視通監控視頻數據恢復軟件，應運而生，為監控視頻數據恢復提供了專業且可靠的解決方案。

這款 Data-SOS?？低?HIKVISON)晧視通監控視頻數據恢復軟件是成都千喜數據恢復中心智慧與技術的結晶，其研發聚焦于海康威視晧視通監控視頻文件的恢復難題。無論是錄像機初始化操作不慎抹去的視頻數據，還是誤刪除且尚未被新數據覆蓋的視頻文件，Data-SOS?？低?HIKVISON)晧視通監控視頻數據恢復軟件都展現出強大的恢復能力。其核心的碎片處理技術堪稱亮點，最大程度地確保監控錄像文件得以成功恢復，為用戶找回珍貴的監控影像資料。

然而需留意，因技術特性，軟件可能遭部分殺毒軟件誤報病毒，此為正?，F(xiàn)象。使用時可關閉殺毒軟件或設為信任運行。

此外，Data-SOS?？低?HIKVISON)晧視通監控視頻數據恢復軟件還具備高度的靈活性與定制化服務能力。如果您對軟件的定制服務感興趣，歡迎隨時通過 QQ 與我們?nèi)〉寐?lián)系。我們的專業團隊將竭誠為您服務，協助您定制專屬的監控視頻數據恢復方案，讓Data-SOS?？低?HIKVISON)晧視通監控視頻數據恢復軟件成為您在數據恢復領域的得力助手，守護您的監控視頻數據資產。

購買軟件請聯系QQ：1429567802 價格:200元/單次 600元/永久

軟件下載

晧視通版? ?全功能版

軟件截圖

轉載請注明：成都千喜數據恢復中心 » Data-SOS?？低?HIKVISON)晧視通監控視頻數據恢復軟件

客戶描述使用的是使用的是索尼SONY_ILCE-7SM3 微單拍攝的視頻，在拍攝過程中由于拍攝設備死機造成C7503.MP4和C7504.MP4損壞不能正常播放。

我們使用WINHEX打開C7503.MP4，根據MP4文件結構定義，本MP4文件由ftyp BOX開始大小為0x1C，在文件開始偏移跳轉0x1C為uuid BOX的大小為0x94，繼續跳轉0x94為mdat Box 大小為0xF8FFFF50，此Box包含MP4文件的媒體數據，繼續跳轉0xF8FFFF50發現已到達文件尾，可以發現此MP4文件缺少moov Box，該box包含了文件媒體的metadata信息，例如視頻和聲音每一幀的開始偏移，每一幀的大小等等非常重要的信息必須要有這些信息播放器才能根據這些信息播放視頻，要粗略了解MP4&MOV的文件結構可以查看MP4文件結構分析一文。

現在這種情況要想修復C7503.MP4和C7504.MP4文件需要參照同一機型同一參照拍攝的視頻，C7666.MP4為客戶發來的參照視頻，分析C7666.MP4的moov Box及下級子Box得到參照數據用于修復損壞的視頻。視頻修復成功能測試播放，一切正常。

轉載請注明：成都千喜數據恢復中心 » 修復相機斷電或其它原因損壞的MP4&MOV視頻文件

（本文為機器翻譯）現代希捷硬盤數據恢復非常復雜，其硬件變得越來越敏感。如果磁頭出現問題，它們可能會在內部固件過程中損壞服務區中的一些關鍵物體。這可能是數據恢復時間增加的一個原因：我們必須花費更多的時間和金錢來尋找新的磁頭并修復不良的系統文件。是否有可能避免這種情況并阻止服務區的寫入？讓我們同成都數據恢復一起來學習一下。

我們有一個Rosewood 家族的ST1000LM035驅動器，我們需要停用服務區中的寫入功能。首先，我們應該使用固件的DiskFW部分。事實上，DiskFW 實際上是一個替換 ROM 擴展——它被加載并替換了 ROM 的完整接口代碼（內存中只有 ROM 中的伺服碼和自適應代碼）。

使用 PC-3000，我們可以在 vol.0x00 文件 ID 0x020D中找到 DiskFW。我們可以通過終端或ATA手動讀取和保存它：

在下一步中，我們必須打開工具->實用程序擴展->使用閃存ROM映像文件并選擇以前保存的20D：

將DiskFW添加到ROM編輯器的另一種方法是直接讀取它：

一旦我們讀取20D，我們將看到一條錯誤消息，這是由于實用程序沒有看到有效的ROM段而出現的，因為我們使用的不是ROM，而是DiskFW：

要停用保護，請在同一菜單中選擇“寫保護”，停用選項。

正如我們之前提到的，所有更改都已應用于 HDD RAM，因此我們只需重新啟動驅動器即可停用寫入保護，并允許磁頭再次在服務區中進行更改。軟復位和硬復位不會停用保護，只有電源重啟才會將其關閉。

轉載請注明：成都千喜數據恢復中心 » 使用PC-3000如何阻止寫入希捷硬盤固件區

讀取模塊到配置文件夾
文件夾: E:\!Profiles\SgF3\Rosewood_8C\SDM1-WES07P6X\Data\SABackup\ModDir\

將跳過 : 000C, 000E, 000F, 0022, 0023, 002C, 0044, 0045, 0046, 0047, 0048, 0049, 004A, 004F, 0052

模塊 0000, Reserved Defect Table (SA defect table)…………………. : Ok
模塊 0001, Drive Information File (DIF)…………………………… : Ok
模塊 0002, Performance Parameter File (PPF)……………………….. : Ok
模塊 0003, Primary Defect File (P-List)…………………………… : Ok
模塊 0005, Manufacturing Information File (MIF)……………………. : Ok
模塊 0008……………………………………………………… : Ok
模塊 000B……………………………………………………… : Ok
模塊 000D……………………………………………………… : Ok
模塊 0013, Disc Registry File (settings, security, etc)…………….. : Ok
模塊 0015, BGMS File (Directed Offline Scan)………………………. : Ok
模塊 0016……………………………………………………… : Ok
模塊 0017……………………………………………………… : Ok
模塊 0019, Log File…………………………………………….. : Ok
模塊 001A, Log File…………………………………………….. : Ok
模塊 001B, Log File…………………………………………….. : Ok
模塊 001C……………………………………………………… : Ok
模塊 001D, Physical Overlay File 0……………………………….. : Ok
模塊 001E, Physical Overlay File 1……………………………….. : Ok
模塊 0020, Physical Overlay File 3……………………………….. : Ok
模塊 0021, Physical Overlay File 4……………………………….. : Ok
模塊 002A, Saved Mode Pages (HDD settings)………………………… : Ok
模塊 002B, R/W Operating Parameters (translator, etc)………………. : Error
錯誤 : Rq Rd Sys File part ID 2B, Offs 0x0 err!技術狀態 0x72, 0x04440000
模塊 0033……………………………………………………… : Ok
模塊 0034, Packed CONGEN XML definition…………………………… : Ok
模塊 003A……………………………………………………… : Ok
模塊 003D, Disc firmware container 1……………………………… : Ok
模塊 003E, Disc firmware container 2……………………………… : Ok
模塊 003F, SED parameters……………………………………….. : Ok
模塊 0040, SED parameters……………………………………….. : Ok
模塊 0041, SED parameters……………………………………….. : Ok
模塊 0042, ST Ovl………………………………………………. : Ok
模塊 0043, Defect list report file……………………………….. : Ok
模塊 004B……………………………………………………… : Ok
模塊 0050, MCMT………………………………………………… : Ok
模塊 0058……………………………………………………… : Ok
模塊 005C……………………………………………………… : Ok
讀取模塊完成

讀取System Files到配置文件夾
文件夾: E:\!Profiles\SgF3\Rosewood_8C\SDM1-WES07P6X\Data\SABackup\SysFiles\
拷貝 : 0 1

Sys File FC00C000(0), Reserved Defect Table (SA defect table)……… : Ok
Sys File FC00C000(1), Reserved Defect Table (SA defect table)……… : Ok
Sys File FC00F203(0)………………………………………….. : Ok
Sys File FC00F203(1)………………………………………….. : Ok
Sys File FC01020D(0), Disc firmware container 1………………….. : Ok
Sys File FC01020D(1), Disc firmware container 1………………….. : Ok
Sys File FC01120E(0), Disc firmware container 2………………….. : Ok
Sys File FC01120E(1), Disc firmware container 2………………….. : Ok
Sys File FC012226(0)………………………………………….. : Ok
Sys File FC012226(1)………………………………………….. : Ok
Sys File FC00D330(0), Packed CONGEN XML definition……………….. : Ok
Sys File FC00D330(1), Packed CONGEN XML definition……………….. : Ok
Sys File FC00E331(0)………………………………………….. : Ok
Sys File FC00E331(1)………………………………………….. : Ok
Sys File FC35701B(0), Primary Defect File (P-List)……………….. : Ok
Sys File FC35701B(1), Primary Defect File (P-List)……………….. : Ok
Sys File FC35E028(0), R/W Operating Parameters (translator, etc)…… : Error
錯誤 : Rd SysF 3:28:0 (0/8000) err = 0x0000000E
Sys File FC35E028(1), R/W Operating Parameters (translator, etc)…… : Error
錯誤 : Rd SysF 3:28:1 (0/8000) err = 0x0000000E
Sys File FC360035(0), Non Resident G-List……………………….. : Ok
Sys File FC360035(1), Non Resident G-List……………………….. : Ok
Sys File FC361036(0)………………………………………….. : Ok
Sys File FC361036(1)………………………………………….. : Ok
Sys File FC365100(0), Physical Overlay File 0……………………. : Ok
Sys File FC365100(1), Physical Overlay File 0……………………. : Ok
Sys File FC366101(0), Physical Overlay File 1……………………. : Ok
Sys File FC366101(1), Physical Overlay File 1……………………. : Ok
Sys File FC367102(0)………………………………………….. : Ok
Sys File FC367102(1)………………………………………….. : Ok
Sys File FC368103(0), Physical Overlay File 3……………………. : Ok
Sys File FC368103(1), Physical Overlay File 3……………………. : Ok
Sys File FC369104(0), Physical Overlay File 4……………………. : Ok
Sys File FC369104(1), Physical Overlay File 4……………………. : Ok
Sys File FC36A105(0)………………………………………….. : Ok
Sys File FC36A105(1)………………………………………….. : Ok
Sys File FC36B106(0)………………………………………….. : Ok
Sys File FC36B106(1)………………………………………….. : Ok
Sys File FC36C107(0)………………………………………….. : Ok
Sys File FC36C107(1)………………………………………….. : Ok
Sys File FC36D108(0)………………………………………….. : Ok
Sys File FC36D108(1)………………………………………….. : Ok
Sys File FC36E109(0)………………………………………….. : Ok
Sys File FC36E109(1)………………………………………….. : Ok
Sys File FC36F10A(0)………………………………………….. : Ok
Sys File FC36F10A(1)………………………………………….. : Ok
Sys File FC37010B(0)………………………………………….. : Ok
Sys File FC37010B(1)………………………………………….. : Ok
Sys File FC37110C(0)………………………………………….. : Ok
Sys File FC37110C(1)………………………………………….. : Ok
Sys File FC37210D(0)………………………………………….. : Ok
Sys File FC37210D(1)………………………………………….. : Ok
Sys File FC373110(0)………………………………………….. : Ok
Sys File FC373110(1)………………………………………….. : Ok
Sys File FC3961D1(0), SED parameters……………………………. : Ok
Sys File FC3961D1(1), SED parameters……………………………. : Ok
Sys File FC3991D2(0), SED parameters……………………………. : Ok
Sys File FC3991D2(1), SED parameters……………………………. : Ok
Sys File FC38430A(0), Disc Registry File (settings, security, etc)…. : Ok
Sys File FC38430A(1), Disc Registry File (settings, security, etc)…. : Ok
Sys File FC34F346(0)………………………………………….. : Ok
Sys File FC34F346(1)………………………………………….. : Ok
Sys File FC3B1348(0), MCMT…………………………………….. : Ok
Sys File FC3B1348(1), MCMT…………………………………….. : Ok
讀取 System Files 完成
服務區信息完成備份

可以從日志中看到只有“模塊 002B”和“Sys File FC35E028(0)”損壞其它固件正常；

解決方法

首先備份非常駐缺陷表，【缺陷表】-【編輯非常駐缺陷表G-LIST(G)】-【保存(S)】保存缺陷表表

重新斷電上電此時能識別硬盤容量，嘗試訪問硬盤的0扇區和最后一個扇區均正常

轉載請注明：成都千喜數據恢復中心 » 恢復希捷硬盤002B模塊(FC35E028系統文件)損壞的解決辦法導致硬盤容量為0 MB數據的方法

如果硬盤上電后狀態燈進入就緒狀態，【工具欄】-【程序自動檢測】-【啟動程序】程序會自動識別硬盤的家族，否則需要手動選擇【硬盤廠商】-【實用程序】-【家族】，如果不清楚該硬盤屬于何家族任意選一個即可

方法一

點擊【啟動實用程序】

【工具】-【擴展實用程序】-【操作 Flash ROM 映像文件】

如果硬盤能正常就緒而且該ROM沒有固件鎖，可選擇【通過ATA讀取】讀取硬盤ROM，否則需要選擇【通過引導代碼讀取】讀取硬盤ROM,【COM端口傳輸速率】需要根據經驗選擇，或從大到小嘗試；

讀取成功后可以手動保存ROM文件

方法二

啟動【Seagate F3 Architecture】-【Boot Code Start】

選擇合適的【COM端口傳輸速率】-【讀取ROM】

讀取成功后【啟動實用程序】

解鎖ROM

如果ROM有固件鎖需要解鎖ROM

點擊【準備技術模式解鎖】

解鎖ROM后重新寫入硬盤即可

轉載請注明：成都千喜數據恢復中心 » 如何使用PC-3000備份希捷硬盤ROM和解鎖ROM

轉載請注明：成都千喜數據恢復中心 » 西部數據2060-810033-000 USB電路板改SATA板接線圖

轉載請注明：成都千喜數據恢復中心 » 西部數據2060-810067-000 USB電路板改SATA板接線圖

還原包含數據庫 Restoring a Contained Database：
當我了解到包含性數據庫，我第一個擔心的問題是，作為一個dba如何阻止那些沒有專業知識的人來訪問數據庫呢？還好，已經有三個保護層面了。

One of the first concerns I had when I learned about contained database was how am I as a DBA protected against giving someone access to a database without my knowledge. Well, there are several layers of protection starting with the fact that it is up to the administrator to enable containment before it even comes in to play.

第一層保護 First Layer of Protection：
在還原一個包含數據庫或創建一個包含數據庫之前，或者之前已經存在一個包含數據庫，那么在服務器級別的包含選項必須要啟動。如果服務器級別不啟動包含選項，那么是完全的保護。你可以通過sp_configure或者通過服務器屬性，它在高級選項里，不過他不是一個真的高級選項，所以在你修改或查看服務器級別包含選項時不需要開啟Show advanced options選項。

Containment has to be enabled at the server level before a contained database can be restored or created or before an existing database can have containment enabled. As long as you do not enable this setting at the server level, you’re completely protected. You can enable it via sp_configure or via the Server Properties dialog (Advanced tab). Despite the fact that it is listed on the Advanced tab, it is not an advanced option. You do not have to enable?Show advanced options?before changing or checking this setting. I see a lot of blog posts stating that it is an advanced option and showing that the Show advanced options has to be set, but it is not and does not.

如果要查看是否開啟了服務器級別的包含選項，也可以查詢sys.configurations這個系統表，用它的好處就是可以自動化腳本，如果要修改，還是需要用sp_configure。

In addition to sp_configure and the Server Properties dialog, you can check the current setting by querying the sys.configurations table. this is my preferred method for querying for configuration settings because it is a lot easier to use in automation scripts. However, if my intent to change it if it needs it, I generally use sp_configure.

如果在沒有啟用包含選項的服務器實例上還原一個包含數據庫，將會失敗并返回下面的信息：

The error message you will receive is:

Msg 12824, Level 16, State 1, Line 1
The sp_configure value 'contained database authentication' must be set to 1 in order to restore a contained database.  You may need to use RECONFIGURE to set the value_in_use.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.

這個信息告訴你需要先啟用服務器級別包含選項才能還原，對于DBA來說，這是一個警告，是否啟用這個包含選項由你自己決定，并不是看到這樣的信息就一定要去啟用，因為可能會影響服務器或數據庫的安全。

If you have not enabled containment at the server level at you attempt to restore a database that has containment enabled, the restore will fail with an error telling you that containment has to be enabled first. This is a warning to the DBA that the database is contained. It is up to you to decide whether enabling containment is the proper thing to do or not. Please don’t just enable it because the error message said to. This affects the security of your server and databases.

開啟或禁用包含數據為選項命令為，注意，這里是Reconfigure，不是Reconfigure WITH OVERRIDE，這里有一個重要的原因，后面對提到。

The option that you are enabling or disabling is?contained database authentication?and the command to enable/disable containment at the server level is as follows:

-- Enable "contained database authentication"
Exec sp_configure 'contained', 1;
Reconfigure;

-- Disable "contained database authentication"
Exec sp_configure 'contained', 0;
Reconfigure;

通過圖形界面：

第二層保護 Second Layer of Protection：
如果你啟用了包含數據庫選項，那么當還原一個包含數據庫時，不會有任何警告或是提示。只能由你自己來確定還原的數據庫是不是包含數據庫，幸運的是，有一個內置的結構可以知道這點，在SQL Server 2012，當你執行RESTORE HEADERONLY時有一個新的列被增加，它就是Containment ，當它為1時，表明是包含數據庫，反之則不是，如下圖我對一個包含數據庫做的檢查：

You will notice that I used RECONFIGURE in that code and not RECONFIGURE WITH OVERRIDE. I did so for a very important reason. I will get to that later, but first, let’s take a look at the next layer of protection. Let’s move a step further and see how you are protected after you have enabled containment at the server level. Once the option is enabled, you will get no warnings whatsoever when you restore a contained database. It’s up to you to make sure you know whether or not the backup you are going to restore is contained or not. Fortunately, there is a built-in mechanism for discovering that.

If you are presented with a backup of a new database, you can check for containment yourself. You don’t have to rely on being told about it. A new column (Containment) has been added to the output of the RESTORE HEADERONLY command. You can use this command to inspect the header information for the backup before restoring it. If Containment = 1, containment is enabled in the database. If Containment = 0, it is not enabled.

In this example, I am checking the header information of a backup named c:\bakCDTest.bak:

Restore HeaderOnly From Disk = 'c:\bakCDTest.bak';

It’s very easy to check and there is no reason not to perform this check before restoring a database if the server has containment enabled.

最后一層保護 Final Layer of Protection：
假設有這樣一個災難恢復場景，你需要盡快的恢復一個數據庫上線，但是當你把它還原到一臺替代服務器上時，你發現它是一個包含數據庫?，F(xiàn)在讓我們假設你還沒有意識到已經啟用了這個設置，而且就你的能力和可以查閱的文檔，你會認為這個數據庫沒有使用包含用戶，再者，假設可能有一些法規或者安全策略，在沒有確切有效文檔支持情況下，不能有包含用戶，但是你可能暫時沒有時間去找到相關人去解釋為什么存在包含用戶，現在你又需要盡快的恢復數據庫又要遵守安全策略。

Let’s say you are in a disaster recovery scenario and you need to get the database back online as quickly as possible, but when you attempt to restore the database on a replacement server, you discover that it has containment enabled. Now let’s assume that you had not been aware that this setting was enabled and to the extent of your knowledge and available documentation, the database does not use contained users. Furthermore, let’s assume that there may be some compliancy regulations or security policies that say that you can’t have undocumented contained users. You may not have time to hunt down someone that can explain why there are contained users. You need to get the database restored and also respect your security restrictions.

在這種情況下，你可以做的就是先啟用包含數據庫選項，再恢復數據庫，然后再禁用掉。

One option you can do is to enable containment at the server level, restore the database, and then disable containment at the server level. If you try to disable containment at the server level using sp_configure and RECONFIGURE, you will get an error message stating that you can not disable containment because there are contained databases. You can force disabling of containment at the server level by using RECONFIGURE WITH OVERRIDE. This is why I was sure to use just RECONFIGURE in the earlier example. I want to ensure that I don’t accidentally disable the setting if there are contained databases without realizing it.

在禁用時，會報錯，需要我們使用WITH OVERRIDE，這其實就是最后一個保護，這就是之前用Reconfigure而不用Reconfigure WITH OVERRIDE的原因。

Here is what happens when you try to disable containment at the server level when a contained database already exists:

-- Disable "contained database authentication"
Exec sp_configure 'contained', 0;
Reconfigure;

Configuration option 'contained database authentication' changed from 1 to 0. Run the RECONFIGURE statement to install.
Msg 12818, Level 16, State 1, Line 3
RECONFIGURE failed. Attempting to change the 'contained database authentication' value to 0 while there are existing contained databases requires a RECONFIGURE WITH OVERRIDE.

-- Force disabling of "contained database authentication"
Reconfigure With Override;

Command(s) completed successfully.

總結 Summary：
三層保護按我個人理解應該就是：服務器級別的contained啟用、RESTORE HEADERONLY可以確認是否為包含數據庫、禁用時如果用Reconfigure，那么存在包含庫就會有警告。作為DBA來講，有責任理清這些，DBA是應該是第一道防護，其次才依靠這三個防護。

There are built-in protections and mechanisms for protecting yourself from restoring a contained database, but there is also a responsibility on us as administrators to make sure we understand our actions and don’t get blind-sided by a contained database. These built-in features should be your second line of defense, and good practices and being diligent about being aware of what we are doing and the implications our actions should be our first line of defense. It’s on us to secure our databases and servers and the built-in functionality is just a fail-safe.

轉載請注明：成都千喜數據恢復中心 » SQL Server 災難恢復之二：包含數據庫備份在還原時的保護

下面我們同千喜成都數據恢復中心的工程師一起來解決這個問題；手上有一塊?TOSHIBA MQ04UBB400 4T的硬盤，PCB電路板型號為：G4311A，現在的故障磁頭0有輕微磨損，懷疑0號盤面劃傷，下面我們通過虛擬磁頭的方式的讀取硬盤其它盤片的數據。

8.硬盤能正常識別，并能讀取固件；

9.新建Data Extractor任務，發現除0頭外的其它磁頭均能正常讀?。?/p>

轉載請注明：成都千喜數據恢復中心 » 東芝硬盤如何虛擬磁頭，東芝硬盤虛擬磁頭的方法？