Today we want to discuss another feature implemented with the new?PC-3000 Software Ver. 6.7.?– the solution to the Device Fault issue. Sometimes, you can get it right after power on. Sometimes, your drive may come into a Ready state, but any action will result in the DWF register and your command will be aborted.
今天我們要討論的是PC-3000軟件新版本6.7所實現的另一功能。 設備故障問題的解決方案。 有時，您可以在通電后立即使用它。 有時，您的驅動器可能會進入“就緒”狀態，但是任何操作都會導致DWF寄存器錯誤，并且您的命令將被中止。

The good thing is the Terminal should still work, so we can get access to data.
好消息是終端仍然可以工作，因此我們可以訪問數據。

This solution has already been shown on the?ACE Lab Online TechCon 2020?and might be useful for those of you who work with Seagate drives every day. At the end of the article, you can also watch the video of the full process.
這個解決方案已經在2020年的ACE Lab在線技術大會上展示過，可能對那些每天與希捷硬盤數據恢復打交道的人很有用。在本文的最后，您還可以觀看整個過程的視頻。

What are the symptoms of the problem?
問題的癥狀是什么？

It can be easily recognized by a strange register combination?(DRD+DSC+DWF):
奇怪的寄存器組合故障（DRD + DSC + DWF燈同時亮起）可以輕松識別它：

How to solve it?
如何解決？

1.First of all, we need to perform an alternative HDD initialization through the Terminal.
1.首先，我們需要通過終端執行另一種HDD初始化。

Pay attention to the supported terminal speed: it can be different for different models. Not all drives can work at maximum speed.
注意支持的終端速度:不同型號終端速度可以不同。不是所有的驅動器都能以最高速度工作。

轉載請注明：成都千喜數據恢復中心 » 如何使用PC-3000 for HDD解決希捷硬盤數據恢復時的 (DRD+DSC+DWF)故障狀態問題