Hello, guys!
As you well know, our new PC-3000 Portable III tool has a built-in screen and it’s own Operating System, which allows communicating with connected drives without a host PC!
眾所周知，我們新的PC-3000 Portable III工具具有內置屏幕和自己的操作系統，該操作系統無需主機即可與連接的驅動器進行通訊！
In this article, we are going to find out what features of the Standalone Mode are available to the owners of the PC-3000 Portable III.
在本文中，我們將了解PC-3000 Portable III的所有者可以使用獨立模式的哪些特性。
The Standalone Mode allows for the following operations:
獨立模式允許以下操作
- Drive diagnostics 驅動器診斷
- Data copying 數據拷貝
- Erasing data from a connected HDD?從連接的硬盤驅動器擦除數據
Each category of operations provides some additional features. For example, during the?drive diagnostic?you can:
每種操作類別都提供一些其他功能。 例如，在驅動器診斷期間，您可以：
- Read drive ID. If it is possible to read ID, then the connected storage device is in good condition.
讀取驅動器ID。如果可以讀取ID，則連接的存儲設備處于良好狀態。 - Read S.M.A.R.T.?parameters. If the S.M.A.R.T. option is available, then the access to the Service Area is available as well, and, most likely, that the drive is in good internal condition.
閱讀S.M.A.R.T. 參數。 如果S.M.A.R.T. 選項可用，則也可以訪問服務區，并且很可能驅動器處于良好的內部狀態。 - Sector View?in HEX. A very useful feature for drive DA access checking. We can read different LBAs along the whole drive surface.
扇形視圖(十六進制)。對驅動器DA訪問檢查非常有用的特性。我們可以讀取整個驅動器表面的不同LBAs。 - Read Test?is used to scan the drive’s surface and search for Bad Sectors. Due to the Read Test, the hash sum can be calculated.?MD5, SHA1, and SHA2?combinations of Hash-Sum calculations are supported.
讀取測試用于掃描驅動器的表面并搜索壞道。 由于進行了讀取測試，因此可以計算出哈希和。 支持哈希和計算的MD5，SHA1和SHA2組合。
Data Copy?allows imaging from one port to another. You can do a copy from Port 1 to Port 2 and 3 at the same time. As an added option, during the copying procedure, you can also launch the?Hash sum calculation.
數據復制允許從一個端口到另一個端口進行成像。 您可以同時從端口1復制到端口2和3。 作為一個附加選項，在復制過程中，您還可以啟動哈?？偤陀嬎?。
Finally, you can use a?Data Erasing?feature for complete data erasing from a target HDD. This option is only required in case when you want to prepare a target HDD (drive to where you will make a copy).
最后，您可以使用數據擦除功能從目標硬盤驅動器中完全擦除數據。只有在準備目標硬盤驅動器(要復制的驅動器)時才需要此選項。
轉載請注明：成都千喜數據恢復中心 » 使用PC-3000 Portable III獨立模式診斷硬盤驅動器，創建扇區拷貝，并刪除數據，而不需要計算機主機
